
Commercial Kitchen Installation
Kitchens designed & installed by our specialists
Gas, electrics, extraction, equipment and stainless steel, fitted by trades who work for us. Whether it's a new build, a strip-out or a single cookline, we install commercial kitchens that open on time.
No charge, no obligation.
- Our own tradesGas, electrical, plumbing and catering installers on our payroll
- In-houseCanopies and tabling made by The Canopy Company
- CSCSAccredited site teams who work inside a main contractor's programme
- 24/7/365Breakdown cover once you're open
- Since 1965Designing, installing and servicing kitchens
A full installation service, from one team
Most kitchen installs slip in the gaps between trades. The canopy arrives before the ductwork is ready, or the gas engineer can’t commission until the electrician’s back.
We close those gaps by doing the whole installation ourselves. Our electricians, plumbers, gas engineers and catering installers all work for us.
Our sister company makes the canopies and tabling, so the person who can fix a problem is already on site.
Every installation includes
- Site survey and measured drawings
- Gas, electrical, water and drainage first fix
- Extraction canopy, ventilation and gas interlock
- Catering equipment delivered, positioned and connected
- Stainless steel tabling, sinks and shelving
- Hygienic flooring and wall cladding
- Commissioning and safety testing
- Handover, staff training and O&M manuals
The commercial kitchen installation process
One project manager and one programme, from the first survey to the day you serve.
- Survey We measure up and check gas, power, water, drainage and the extract route before anything is priced.
- Programme One programme for every trade, planned around your opening date or your main contractor's.
- Fabricate and order Canopies and tabling go into our own workshop. Equipment is ordered to land when the room is ready for it. Bespoke fabrication
- First fix Gas, electrics, water and drainage run in, and ductwork goes in before the walls are clad.
- Install Canopies hung, tabling set, equipment positioned and connected by our own installers.
- Commission and hand over Everything tested and commissioned, your team trained, certificates and manuals handed over. Maintenance
Commercial kitchen installers for contractors
The kitchen is the package most likely to hold up a handover. We take it off your plate, with one point of contact and paperwork you can file.
- Our own trades. Catering, electrical, gas and plumbing installers, all directly employed.
- CSCS-accredited site teams used to working inside a main contractor's programme.
- Fabrication under our control, so a design change doesn't wait in someone else's queue.
- Handover packs with drawings, equipment schedules, commissioning records and O&M manuals.
Leeds University Union. Four new commercial kitchens installed for the union’s catering operation.
Commercial kitchen installers for operators
If you're refitting a kitchen that's already trading, every closed day costs covers. We plan the install so you lose as few as possible.
- Phased installs. Work split into stages so part of the kitchen stays open.
- Out-of-hours work where the job needs it.
- Trained on handover. Your team shown how every piece of equipment works before service.
Equipment installation, design and install, or full fit-out
Not every job is a whole new kitchen. Pick the level of help you need. Not sure? Call 01254 277 999.
-
Commercial kitchen equipment installation
New equipment supplied and installed into your existing kitchen, connected and commissioned by our own engineers.
- Supply, position and connect
- Gas and electrical sign-off
- Old equipment taken away
-
Commercial kitchen design and installation
We design the kitchen, make the stainless steel, supply the equipment and install the lot.
- One designer, one installer
- Canopies made in-house
- One programme, one invoice
-
Total fit-out
When the job is bigger than the kitchen, we act as principal contractor for the whole premises.
- Principal contractor
- Trades co-ordinated for you
- CSCS site management
Kitchen installations for every kind of site
From a café behind a serving hatch to an industrial kitchen feeding a distribution centre.
- Pubs and breweries
- Restaurants
- Hotels
- Schools and universities
- Hospitals and care
- Workplace catering
- Golf and leisure
- Retail and forecourts
-
Restaurant and pub kitchen installation
Cooklines, passes and back bars installed around service, so food moves one way and the kitchen holds up on a Saturday night.
-
Industrial kitchen installation
High-volume production kitchens for universities, workplaces and distribution centres, with extraction and gas sized for the load.
-
Small commercial kitchen installation
Tight, awkward spaces get tabling and canopies fabricated to fit, not equipment forced into a gap.
Before and after the installation
-
Commercial Kitchen Design
Layouts planned around your menu and your covers, before a single pipe goes in.
-
Commercial Kitchen Ventilation
Extraction canopies, supply air and gas interlocks, designed and installed together.
-
Commercial Kitchen Equipment
Cooking, warewash and prep equipment, specified for your menu.
-
Stainless Steel Fabrication
Canopies, tabling, sinks and serveries made in-house by The Canopy Company.
-
Commercial Kitchen Maintenance & Repair
Planned servicing and 24/7/365 breakdown cover once you're open.
-
Catering Equipment Rental
Equipment on one monthly fee, with repairs, parts and labour included.
One thing that makes Acme shine out over other suppliers that we’ve used previously is that they will always deliver on their promise.
Trusted by names you’ll know
-
Foxfields Country Hotel
Foxfields country hotel is a 44 bedroom hotel with four function rooms and a brand new 200 cover restaurant on…
-
Leeds University Union
Leeds University Union (LUU) has been ranked consistently as a top 10 UK Students’ Union by the Telegraph, Which? and…
-
Zaap Thai
Zaap Thai is a restaurant chain that aims to bring the vibrant atmosphere and authentic flavours of Bangkok's street food…

Maintenance and repairs by the same team
Our work doesn't end at handover. The engineers who look after your kitchen work for the same company that installed it, with planned maintenance and 24/7/365 call-outs for catering, refrigeration and air conditioning equipment.
Commercial kitchen installation FAQs
Most of the time goes into survey, design, fabrication and equipment lead times, not the install itself. Once everything is on site, our own trades work to one programme, so the room isn’t waiting on another contractor.
It depends on the size of the room, the extraction it needs, how much gas, electrical and drainage work there is, and the equipment you specify. We price every installation after a site survey, and you can buy, finance or rent the equipment.
We can phase the work so part of the kitchen stays open, and work outside trading hours where the job needs it.
Yes, our sister company makes the extraction canopies, and our own engineers install them with the ventilation and gas interlock as part of the same programme.
We can take the commercial kitchen package within a main contractor’s programme, or act as the principal contractor for the whole fit-out. Our site teams are CSCS-accredited.
Your team trained on the equipment, commissioning records, equipment schedules and O&M manuals.
We’re based in Blackburn, Lancashire, and install commercial kitchens across the UK.
Ready to plan your kitchen installation?
Send us your plans, or tell us about the space and your menu, and we'll tell you what's possible, how long it takes and what it costs.
Talk to our installation team
Planning a new kitchen or refitting an old one? Leave your details and a project manager will call you back.
01254 277 999




















